Detailed Photos
DMF
CAS No. 68-12-2
Purity: 99.95%
Standard package: 190kg /drum , IBC DRUM
20'Fcl Loading Capacity: 15.2 Mt
MOQ(Min Order Qty): 15.2 Mt.
Main MFGR/Brand: LUXI CHEMICAL
Feature:glacial acetic acid is a colorless hygroscopic liquid , colorless crystal after solidification Grades/Types: Industrial grade Application: DMF is a good solvent for a variety of polymers such as polyethylene, polyvinyl chloride, polyacrylonitrile, polyamide and so on. It can be used for wet spinning of synthetic fibers such as polyacrylonitrile fiber and synthesis of polyurethane.
N,N-dimethylformamide, an organic compound with the chemical formula C3H7NO, is a colorless transparent liquid. It is not only a widely used chemical raw material, but also an excellent solvent. Except halogenated hydrocarbon, it can be mixed with water and most organic solvents at will, and has good solubility for a variety of organic and inorganic compounds.
| Product name |
N,N-Dimethyformamide(DMF) |
| MOQ |
12.8Ton |
| Density |
0.948 g/cms |
| Boiling point |
-61°ºC |
| Molecular weight |
73.09 |
| Packaging |
Iron Drum/ISO Tank |
| Flash point |
58 °C(OC) |
Application
1,Used as analytical reagent and solvent of vinyl resin and acetylene.
2,It is an excellent organic solvent. It is used as a solvent for polyurethane, polyacrylonitrile and polyvinyl chloride, as well as As as an extractant, pharmaceutical and pesticide raw material for chlordimeform.
3,Dimethylformamide is not only an extremely versatile chemical raw material, but also an excellent solvent with a wide range of uses. It can be used for wet spinning of polyacrylonitrile fiber and other synthetic fibers, synthesis of polyurethane, plastic film, paint removal agent, and some pigments with low solubility, give the pigment the character of a dye.
4,Reagent for non-aqueous solution titration, solvent of vinyl resin and acetylene, organic synthesis, photometric determination, gas chromatography stationary liquid (maximum temperature 50 ° C, solvent is methanol) , separation and analysis of C2-C5 hydrocarbons, and can separate N-, isobutene-[1] and cis-, trans-butene-[2] . Analysis of pesticide residues. Organic synthesis. Synthesis of peptides. For the photographic industry.
Certifications
Packaging & Shipping
190KG/Drum, 80 DRUMS/20'GP, 15.2 TON/20'GP;
22TON/ ISOTANK
Precautions
Emergency measures
Skin contact: Immediately remove contaminated clothing and rinse with plenty of flowing water for 20-30 minutes. If you feel uncomfortable, seek medical attention. If you feel uncomfortable, seek medical attention.
Eye contact: Immediately lift the eyelids and thoroughly rinse with plenty of flowing water or saline solution for 10-15 minutes. If you feel uncomfortable, seek medical attention.
Inhalation: Quickly leave the scene and move to a place with fresh air. Keep the respiratory tract unobstructed. If breathing is difficult, administer oxygen. Respiratory and cardiac arrest, immediately perform cardiopulmonary resuscitation. Seek medical attention.
Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention.
Fire protection measures
Hazardous characteristics: Flammable, with the risk of combustion and explosion when exposed to open flames, high heat, or contact with oxidants. It can react violently with concentrated sulfuric acid and fuming nitric acid, and even explode. Strong reactions can occur with halides such as carbon tetrachloride.
Harmful combustion products: carbon monoxide, nitrogen oxides.
Extinguishing method: use foggy water, insoluble foam, dry powder, carbon dioxide and sand to extinguish the fire.
Firefighting precautions and measures: Firefighters must wear gas masks and full body firefighting suits, and extinguish fires in the upwind direction. Try to move the container from the fire scene to an open area as much as possible. Spray water to keep the fire container cool until the fire is extinguished. If the container in the fire has changed color or produced sound from the safety relief device, it must be evacuated immediately.
Emergency response to leakage
Eliminate all ignition sources. Designate a warning zone based on the impact area of liquid flow and vapor diffusion, and evacuate unrelated personnel from crosswind and upwind directions to a safe zone. It is recommended that emergency personnel wear positive pressure self-contained breathing apparatus and anti-static clothing. All equipment used during homework should be grounded. Do not come into contact with or cross over leaked materials. Cut off the leakage source as much as possible. Prevent leakage from entering water bodies, sewers, basements, or enclosed spaces.
Minor leakage: Absorb with sand or other non combustible materials. Collect absorbent materials using clean, non sparking tools.
Massive leakage: Construct embankments or dig pits to contain it. Absorb a large amount of liquid with fly ash or lime powder. Cover with insoluble foam to reduce evaporation. Spray mist can reduce evaporation, but it cannot reduce the flammability of leaked materials in confined spaces. Transfer to a tanker or dedicated collector using an explosion-proof pump.
Handling and Storage
Precautions for operation: Closed operation, comprehensive ventilation. Operators must undergo specialized training and strictly adhere to operating procedures. It is recommended that operators wear filter type gas masks (half face masks), chemical safety goggles, chemical protective clothing, and rubber gloves. Keep away from sources of fire and heat, and smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Prevent steam leakage into the workplace air. Avoid contact with oxidants, reducing agents, halogens, and acids. Charging should control the flow rate to prevent static electricity accumulation. Handle with care during transportation to prevent damage to packaging and containers. Equip with corresponding types and quantities of fire-fighting equipment and emergency response equipment for leaks. Empty containers may contain residual harmful substances.
Storage precautions: Store in a cool and ventilated warehouse. The storage temperature should not exceed 37 ºC and should be kept away from sources of fire and heat. Keep the container sealed. It should be stored separately from oxidants, reducing agents, halogens, etc., and avoid mixing storage. Adopt explosion-proof lighting and ventilation facilities. Prohibit the use of mechanical equipment and tools that are prone to generating sparks. The storage area should be equipped with emergency response equipment for leaks and suitable containment materials.
Individual protection
The production process is sealed, fully ventilated, and equipped with safety showers and eye wash devices; When the concentration in the air exceeds the standard, wear a filter type gas mask (half face mask); Wear chemical safety goggles; Wear chemical protective clothing; Wear rubber gloves; Smoking is strictly prohibited on the work site; After work, take a shower and change clothes.
Disposal of waste
Waste nature: hazardous waste
Disposal method: Use incineration method for disposal. Mix with fuel and then incinerate. The nitrogen oxides discharged from the incinerator are removed by a scrubber.
Disposal precautions: Before disposal, relevant national and local regulations should be consulted. Return empty containers to the manufacturer or bury them in designated locations.
Company Profile
1.Toplink takes "Focus on chemical industry, attentive service, customer first" as its core value. Our main advantage is to integrate the warehouses and storage facilities authorized by large domestic chemical producing companies to minimize the procurement cost of customers and maintain stable prices.
2.Being close to Qingdao sea ports, the largest chemical exporting ports in northern China, enables Toplink to handle the logistics in a high efficiency. Over the years, Toplink has been adhering to the core of user's needs and requirements. Not only comprehensively doing the local market development, but also Toplink provides chemical products and after-sales services for many foreign customers from different countries and regions such as Russia, Middle East, Asia Pacific, Africa, North America etc.
3.The high-quality and attentive service has won the trust and praise of many customers, and gradually Toplink established a good brand image of the company in northern China.
FAQ
Q: What is the payment terms?
A: T/T and L/C
Q: What is the minimum order quantity?
A: One 20'FCL container
Q: Which kind of package do you have?
A: Iron drums, IBC Drums, Flexitank, ISO TANK and bags etc.
Q: How can I get samples?
A: We provide you samples for free, but you have to pay for the courier charges.
Q: How long is your delivery?
A: Within 7-15 days after receiving the T/T deposit or L/C original.
){kind=link}